The installation of stop signs is one of the traffic apparatus that is very easy to install, but there is so much that goes into installing such a traffic control device. The traffic control sign will give direction to your drivers on when to stop, inform them of who has the right of way, and also give them information on any hazard that may exist. As you look for stop signs for sale, you may be seeking something better than just a stop sign with a red octagon on a post.
This article will guide you on how to purchase, when you should use solar or lighted stop signs.
Why the Right Stop Sign Matters
There are lots of traffic accidents in intersection places. Distorted, fading, and not visible stop signs lead to accidents. Drivers who miss stop signs would either run into the intersections or will slow down very late.
Correct signage is vital because:
- It gives you rules that need to be followed by all drivers.
- It prevents confusion in complex intersection places.
- It helps to meet the obligations of your organization according to the law.
- It is useful for everyone, whether pedestrian, bicycle or car.
There is much at stake; one should think and make the right decision.
What to Look for When Shopping for Stop Signs
Not all stop signs on the internet have the same design. Below are some features that need to be considered when buying the product.
Dimensions and Conformity
In the US, stop signs follow the rules laid out in the MUTCD (Manual on Uniform Traffic Control Devices). These specifications determine the stop signs’ shape, color, legend, and dimensions. The signs must be in an octagonal design, with a red background, white border, and letters “STOP”. Stop signs with 30 inches are often used in low-speed streets while 36-inch stop signs are best suited for multilane and fast-moving traffic. Larger sizes are needed in areas that require improved visibility. Smaller 24-inch stop signs can be seen in private roads.
Always make sure that the size is compatible with the road and your area.
Retroreflective Sheetings
A stop sign is only effective if motorists can see it during the dark hours. Get stop signs with superior quality retroreflective sheeting that will reflect the headlights to the driver. There are varying grades of sheeting, and higher grades provide better brightness, wider viewing angles, and longevity. Check the warranty period since it is one way to determine its quality.
Durability of Materials
Stop signs produced by professionals typically use aluminum substrate. The material is resistant to corrosion and can stand both adverse weather and mechanical stress. Also, the thickness of the blank affects how long the sign can last – the thicker the metal, the better it withstands weather, vandalism and everyday wear and tear.
Installation Equipment
There is no sense to purchase a high-quality sign if it is installed on a bad post. Consider the installation equipment and its quality that is necessary for mounting a stop sign on poles, which includes U-channel posts, square tube posts, installation brackets, and anti-theft hardware.
Special Features
There may be times when a regular stop sign won’t do and you need something additional. This can be a stop sign with a special plaque (e.g., “ALL WAY” or “4-WAY”) or a special-sized sign for a private street or road.
Solar Stop Signs: Visibility Without Wiring
- Normal stop signs depend on reflectors only. That may be enough for many cases, however, in certain areas it is necessary to have something more noticeable. Here comes the solar stop sign.
- The construction of the solar stop sign is based on a classic sign that uses LED lamps powered by a small solar panel and rechargeable battery. During daytime the panel stores the energy. At night and in the low-light conditions LEDs either glow or blink to attract the driver’s attention.
Why Go Solar?
- No trenching or wiring. Can be installed even in remote, rural and private areas where wiring is too expensive and complicated.
- Cheaper operation. Free sunlight means you won’t have to pay any electricity bill.
- Keep working even in outage conditions. Being independent from the power grid they continue working even in the case of power outages.
- Quick installation. It can be installed in a very short period using only the standard tools.
- Good environmental image. Solar equipment meets the sustainability requirements of the city, university or business.
Where They Work Best
Solar stop signs represent an intelligent choice for use at intersections on rural roads that have experienced run-through accidents, roads with curves or hills where sight distance is restricted, areas around schools and college campuses, roadwork and construction zones, as well as gated or industrial compounds. When selecting solar stop signs, determine the panel size, battery power, and run time.
Lighted Stop Sign: Highlighting Destructive Intersections
LED stop signs utilize LEDs that are integrated into the sign itself or at its sides. The signs can be either flashing or always-on. They can be powered by solar energy, but there are some that run on grid electricity.
Advantages of Lighted Stop Signs
- Increased visibility in low visibility situations. The fog, rain, twilight, and dawn will make the sign hard to read. It will not have an effect on the illuminated one.
- Greater driver response. It will draw the attention of the drivers and cause them to brake sooner.
- Suitable for intersections that are problematic. This is a good choice for an intersection which needs some improvement without any construction work done.
- Durability of the LED lights. Good LED lights are highly durable.
Points to Remember
There are particular places where the use of lighted signs is unnecessary. Additionally, there are agencies having regulations about them. Make sure you consult with the traffic authorities in your area before installing the sign on a public road. Ensure that you get the stop sign that is weather-resistant, maintenance-friendly, and brightly lit from all sides.
Standard, Solar, or Lighted: Which Should You Buy?
A simple approach is to choose signs based on the risks involved:
- Standard Stop Sign: This is the best sign for the normal intersection where visibility is good and accidents are few.
- Solar Stop Signs: These are the perfect signs for hard-to-reach or risky locations.
- Lighted Stop Sign: This is the perfect sign for risky or obscured locations or places where there is much traffic.
Consumers usually buy all three together. For example, a whole city might use the standard signs at all intersections except those that present major difficulties.
Smart Buying Tips
- Check conformity. Check that the sign meets MUTCD requirements and state and local standards.
- Ask questions regarding materials. Get information regarding aluminum materials and sheeting grade.
- Compare warranties. A long warranty period indicates high quality of the product.
- Take into account the whole system. Posts, brackets, and fasteners should be included into consideration.
- Maintenance is crucial. Find out how the batteries, panels, and LEDs can be maintained.
- Order from an expert. A manufacturer specializing in traffic safety will assist you in choosing the product, not in fulfilling the order.
Conclusion
The process of buying a stop sign should not prove difficult to anybody. First, identify an appropriate and robust stop sign that will suit you, then decide whether solar or lighted stop signs are required in your area. Selecting an appropriate sign will help secure the safety of motorists, reduce the likelihood of an accident, and help save money too.
If you are looking to buy one, Roadwaysigns provides a wide range of safety signs including solar and lighted stop signs among others. Visit http://www.roadwaysigns.com to see more of their safety signs.
Frequently Asked Questions (FAQs)
1. What size should my stop sign be?
The common size is 30 inches on regular streets; however, 36 inches or bigger are required on roads with several lanes or higher traffic speed. 24 inches are common for parking lots and other private places. Do not forget to find out the required size in your area before ordering one.
2. Will a solar stop sign work in cloudy weather?
Certainly, but only in case it has appropriate size. The battery installed in such signs stores enough energy to operate during several days without any sunlight.
3. Is it allowed to mount a lighted stop sign on a street?
It depends on the local regulations. But often such signs are permitted at dangerous intersections.
4. How long will my stop sign last?
A good quality sign with appropriate retroreflective sheeting will last from 7 to 12 years and more. The warranty period depends on the sheeting quality, environmental conditions, and maintenance. Make sure you understand everything about the warranty offered by the manufacturer.
5. Can I get a customized stop sign?
Certainly, but make sure they are appropriate according to your local requirements.